RPP02N Portable Receipt Printer Product Introduction and Performance Features

Today, we're introducing Rongda RPP02N. Portable Receipt PrinterProduct introduction and performance characteristics.

1. Appearance of RPP02N Portable Receipt Printer

1) Paper feed button

2) Power button

3) Power indicator light

4) Paper feed indicator light

5) Top cover

6) Main body

7) Front cover

8) RS232 serial port socket

9) Power interface

10) USB interface

11) Battery box

2、、、RPP02N Portable Receipt Printer Features

1) Printing performance

Printing method: Line thermal printing

Paper width: 58mm

Print width: 48mm

Resolution: 8 dots/mm (203 dpi)

Points per row: 384

Printing speed: 50～80mm/s

Paper thickness: 60–80 μm

Printable content: Chinese characters (supports all Chinese characters in GB18030, character sets, ASCII characters, several full-width custom characters, several half-width custom characters, barcodes CODE39, EAN13, EAN8, CODABAR, CODE93, ITF, and graphics).

2) Physical parameters

External dimensions: 103*75*46mm

Weight: 240g (including paper roll)

Paper roll diameter: ≤40mm

Interface options: RS232 serial port, USB, Bluetooth; the specific interface may vary depending on the model.

3) Environmental parameters

Operating temperature: 0℃～50℃

Operating humidity: 10%～80%

Storage temperature: -10℃～60℃

Storage humidity: 10%–90%

4) Other performance

Paper loading method: Clamshell paper loading (see 4.1.2 Printing paper roll installation for details on paper loading method);

Paper out detection: When the paper is out, both the printer's power indicator and paper feed indicator will flash;

Print control commands: ESC/POS compatible command set (see the Programming Manual, which is available from your supplier);

Power supply: 1600mAh rechargeable lithium battery

Adapter charging: 3.5 hours to fully charge; USB charging: 7 hours.

Note: The 02N battery cannot be charged simultaneously using an adapter and a USB port.

Usable time on a single charge: Under normal circumstances, it can print continuously for 230 meters or 6.5 hours (print density of 12.5%). This parameter is for reference only. After prolonged use, the battery capacity may decrease, and the printing time cannot be guaranteed.